Home  |  Surfboard Kits  |  Accessories  |  Gallery  |  About Us  |  Contact Us  |  Videos  |  News at WSS

Material may not be used without permission of Wood Surfboard Supply Inc. (WSS Inc.) Site Revised  04/10
A basic vent for hollow surfboards.  
Its all brass with a neoprene washer
for a positive seal.  The screw is
notched so when you raise it up it
vents.  No need to completely remove
the screw and chance loosing it.  
Comes with installation  instruction
sheet. (2 recommended for SUP's)
$7.99
BRASS SURFBOARD VENT
INSTALL YOUR CUSTOM WOOD FIN USING OUR FIN BASE!
Wood Surfboard Supply is now producing a CNC-machined polycarbonate fin base that makes it easy
to install your own custom wood fin.  The hardest part of installing a removable fin is getting the base
right and we've done that for you.  You simply build a pocket into your custom fin and epoxy the tab in.  
No more having to build up dozens of layers of fiberglass to get a strong water proof base.  This clear
polycarbonate base comes in two sizes: 7" for fins up to 8" and 9" for fins up to 10".   Fully illustrated
instructions are included with each fin base.

The bases fit standard 8 1/2" and 10 1/2 fin boxes and include a break-away slider screw designed to  
protect your board and fin by allowing the plate release upon severe  impact.  If you hit a rock you won't
rip the fin box out of the board or destroy that beautiful custom fin.
The CNC-machined polycarbonate fin base is epoxied into a
pocket or groove in your custom fin.  Since fin boxes from different
manufacturers can vary in width, the base is made to fit the
widest box we have found.   If need be it can be sized by simply
sanding the sides of the base.
The base can also be used with
smaller fins by trimming the tab to
size.  The roll pin is rust-proof
stainless steel and the slider
screw is a break-away
brass/neoprene design that will
release the fin upon severe impact.
These fin bases are currently available through
Greenlight Surf Supply
Soft Hemp Surfboard Racks from Wave Tribe
Made of hemp, this surfboard soft-rack looks cool on top of your
rental or your own ride as you cruise down the coast looking for
the best break.

  •  Fit snugly into your suitcase in a protective travel pouch
  • You got two options, single or double
  • The double fits boards on TWO sides of the rack and the
    single for boards on ONE rack
  • Get the DOUBLE for more people and for more options
  • Get the SINGLE if you are traveling solo.
Wave Tribe Soft Rack - Single $33.95
Wave Tribe Soft Rack - Double $57.95
Watch the Video on our soft surfboard racks.