"The Gordo" is our original
"Big Boy Board". . But just
because its big doesn't mean it's
clumsy.  The rails have been
pinched slightly to give it agility
and performance.

10’ 0” Longboard
Width – 23 31/2"
Nose – 18"
Tail – 15 1/2 "
Thickness – 3 3/8 in.

This Kit contains a complete
frame consisting of ribs and main
spar (stringer) as well as an
electronic assembly manual in
PDF format covering every step.
The electronic manual is emailed
directly to you and you are
licensed to save and/or print
copies for personal use.  You will
need wood for the outside
planking, fiberglass, glue,
sandpaper and common tools  to
complete the kit.
"The Muy Gordo" has the same
basic measurements as the Gordo, its
just a little more volume.  And more
volume means better flotation.
Catches waves easily and can even  
be used as a smaller Stand Up
Paddleboard. You'll catch waves
easier than you knew was possible.  

10’ 6” Longboard
Width – 24 3
/4"
Nose – 19 1/2"
Tail – 15 "
Thickness – 3 3/4 in.

This Kit contains a complete frame
consisting of ribs and main spar
(stringer) as well as an electronic
assembly manual in PDF format
covering every step. The electronic
manual is emailed directly to you and
you are licensed to save and/or print
copies for personal use.  You will need
wood for the outside planking,
fiberglass, glue, sandpaper and
common tools  to complete the kit.
Data not available (103)

Return to Previous Page
''; document.forms['Form4'].method='post'">
Error: Data not available (103)
The 9'6" Cruiser  The original
Curiser was inspired by the great
longboards of the 60s  Build it with
retro 50-50 rails for that sweet turns on
a dime and hugs a wave tight. Its got
just enough rocker to be forgiving on
late takeoffs but still has speed down
the line. Be prepared to spend some
serious nose time with this board.

9’ 6” Longboard
Width – 23 7/16 "
Nose – 19 3/16"
Tail – 16 3/4"
Thickness – 3 5/16"

This Kit contains a complete frame
consisting of ribs and main spar
(stringer) as well as an assembly
manual in PDF format covering every
step. The electronic manual is emailed
directly to you and you are licensed to
save and/or print copies for personal
use.  You will need wood for the
outside planking, fiberglass, glue,
sandpaper and common tools  to
complete the kit.
"The Mini Mal" Classic mini Malibu
style longboard with its roots in the 60s.  
Build it with modern rail profile for a
great performer or stick with the
traditional 50/50 rails for that sweet
paddling nostalgic feel.  The Mini Mal is
a perfect starter board for the younger
experienced rider and makes a great
transitional board.

8’ 5” Mini Malibu
Width – 22 1/2"
Nose – 21 3/4"
Tail – 15 1/4"
Thickness – 2 1/2"

This Kit contains a complete frame
consisting of ribs and main spar
(stringer) as well as an assembly
manual in PDF format covering every
step. The electronic manual is emailed
directly to you and you are licensed to
save and/or print copies for personal
use.  You will need wood for the outside
planking, fiberglass, glue, sandpaper
and common tools  to complete the kit.
Surfboard kits prices include ground shipping inside US only.  Customers
outside the continental US must order an Export Kit
Surfboard kits prices include ground shipping inside US only.  Customers outside the continental US must order an Export Kit
Surfboard kits prices include ground shipping inside US only.  Customers outside the continental US must order an Export Kit
Surfboard kits prices include ground shipping inside US only.  Customers outside the continental US must order an Export Kit
The 9'0" Cruiser  is a slightly
shortened  and trimmed down
version of the Original Cruiser.  We
took 6" off the length and narrowed
performance out of this classic
longboard shape. Its still got just
enough rocker to be forgiving on late
takeoffs but still has speed down the
line. Be prepared to spend some
serious nose time with this board.

9’ 0” Longboard
Width – 22 1/4"
Nose – 18 1/4"
Tail – 16"
Thickness – 3 1/4"

This Kit contains a complete frame
consisting of ribs and main spar
(stringer) as well as an assembly
manual in PDF format covering every
step. The electronic manual is
emailed directly to you and you are
licensed to save and/or print copies
for personal use.  You will need wood
for the outside planking, fiberglass,
glue, sandpaper and common tools  
to complete the kit.
Surfboard kits prices include ground shipping inside US only.  Customers outside the continental US must order an Export Kit
Basic Kit
Export Kit
Shipped Free to Lower 48 States
Basic Kit
Export Kit
Free Priority Shipping Anywhere in the World
Shipped Free to Lower 48 States
Basic Kit
Export Kit
Free Priority Shipping Anywhere in the
World
Shipped Free to Lower 48 States
Basic Kit
Export Kit
Free Priority Shipping Anywhere in the World
Shipped Free to Lower 48 States
Basic Kit
Export Kit
Free Priority Shipping Anywhere in the World
Shipped Free to Lower 48 States
9'0"Basic Kit
9'0"Export Kit
Free Priority Shipping Anywhere in the World
Shipped Free to Lower 48 States
"The What I Ride" The Robert August
What I Ride is the board that Robert
August uses himself around the world
during his surf travels. This board can
the tail to great nose rides. The What I
Ride features a moderate width nose
with a nose concave underneath for
extra lift while nose riding.  60/40 rails let
it will paddle nicely and still crank turns
at will.

9’ 0” What I Ride
Width – 22 3/4"
Nose – 18"
Tail – 15"
Thickness – 3"

This Kit contains a complete frame
consisting of ribs and main spar
(stringer) as well as an assembly
manual in PDF format covering every
step. The electronic manual is emailed
directly to you and you are licensed to
save and/or print copies for personal
use.  You will need wood for the outside
planking, fiberglass, glue, sandpaper
and common tools  to complete the kit.
Surfboard kits prices include ground shipping inside US only.  Customers outside the continental US must order an Export Kit
Data not available (103)

Return to Previous Page
''; document.forms['Form74'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form75'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form76'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form77'].method='post'">
Error: Data not available (103)
9'6"Export Kit
Free Priority Shipping Anywhere in the World
Shipped Free to Lower 48 States
"The What I Ride" The Robert August
What I Ride is the board that Robert
August uses himself around the world
during his surf travels. This board can
do it all from powerful carving 360s off
the tail to great nose rides. The What I
Ride features a moderate width nose
with a nose concave underneath for
extra lift while nose riding.  60/40 rails let
it will paddle nicely and still crank turns
at will.

9’ 6” What I Ride
Width – 23"
Nose – 18"
Tail – 15"
Thickness – 3"

This Kit contains a complete frame
consisting of ribs and main spar
(stringer) as well as an assembly
manual in PDF format covering every
step. The electronic manual is emailed
directly to you and you are licensed to
save and/or print copies for personal
use.  You will need wood for the outside
planking, fiberglass, glue, sandpaper
and common tools  to complete the kit.
Surfboard kits prices include ground shipping inside US only.  Customers outside the continental US must order an Export Kit
9'6"Basic Kit
Data not available (103)

Return to Previous Page
''; document.forms['Form104'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form105'].method='post'">
Error: Data not available (103)
Free Shipping to
Lower 48 States
(714) 834-9968
NEED HELP?
Just hit the button
Home | Longboards | Performance Boards | Fish | SUP's | Books and Manuals | Glassing Kits | Fin Kits | Board Bags | VersaTraction | Surfboard Wood | Finished Boards
Material may not be used without permission of Wood Surfboard Supply Inc. (WSS Inc.)
Data not available (103)

Return to Previous Page
''; document.forms['Form121'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form122'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form123'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form124'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form125'].method='post'">
Error: Data not available (103)
Data not available (103)

Return to Previous Page
''; document.forms['Form126'].method='post'">
Error: Data not available (103)
$225.99
Free Priority Shipping Anywhere in the World
NEW!
NOTE
The nose on this
prototype board was
deliberately
sharpened. If you
build the board
according to plan it
will be shaped like an
original WIR as shown
below.
All Complete Kits
Shipped Free to
Lower 48 States!
Complete Kits
All Complete Kits
Shipped Free to
Lower 48 States!
Complete Kits
All Complete Kits
Shipped Free to
Lower 48 States!
Complete Kits
All Complete Kits
Shipped Free to
Lower 48 States!
Complete Kits
All Complete Kits
Shipped Free to
Lower 48 States!
Complete Kits
All Complete Kits
Shipped Free to
Lower 48 States!
Complete Kits
Shipped Free to
Lower 48 States!