Stand Up Paddleboards (SUP)

The "Orca" was designed
for stand up paddling which
requires maximum flotation
and stability. It has a flat
bottom and enough rocker
that it is at home paddling into
a wave,

12’ 0” Ocean SUP
Width – 29 1/4"
Nose – 18 3/4"
Tail – 16 3/4"
Thickness – 4 3/4 in.

The round rails and high
volume make for effortless
paddling whether you are
catching waves the way the
ancient Hawaiians did or
simply cruising the bay. Add
one of our windsurfer
conversion kits and a sail for
the ultimate Orca.

The "Lake Superior" was
designed for stand up paddling
in lakes and calm water. It has
less rocker than its cousin "The
Orca" because it doesn't have
to contend with waves.

12’ 0” Lake SUP
Width – 29 1/4"
Nose – 18 3/4"
Tail – 16 3/4"
Thickness – 4 3/4 in.

This flatter profile makes it
easier to paddle without plowing
the water. The round rails and
high volume give stability and
maximum flotation. The Lake
Superior is also a great
recreational float or fishing
platform. Add one of our
windsurfer conversion kits and
a sail for the ultimate Lake
Superior.

IMPORTANT! - This Kit contains a complete frame consisting of ribs and main spar
(stringer) and an assembly manual . You will need wood for the outside planking,
fiberglass, glue, and common tools to complete the kit.

The " Malco" 11 foot SUP was
designed by Malcolm Schweizer
in St. Thomas, Virgin Islands.
It has a little concave in the
nose and a slight "V" in the tail.
Plus the new rib design lets you
build the rails two different ways
(built up solid rails or wood strip
hollow rails)

11’ 0” SUP
Width – 30 3/4 in.
Nose –23 1/2 in.
Tail – 19 in.
Thickness – 4 1/4 in.

A SUP needs to have good hull
speed for "flat-out" paddling but
needs to have the ability to
plane for surfing. The Malco
was designed to achieve both
these goals. You can paddle
fast for long distances, but still
be able to easily surf once you
are there. It is designed with
paddling in
mind - its not just a big
surfboard that comes with a
paddle,

IMPORTANT! - This Kit contains a complete frame consisting of ribs and
main spar (stringer) and an assembly manual . You will need wood for the
outside planking, fiberglass, glue, and common tools to complete the kit.

IMPORTANT! - This Kit contains a complete frame consisting of ribs and main
spar (stringer) and an assembly manual . You will need wood for the outside
planking, fiberglass, glue, and common tools to complete the kit.