Boards up to 10'6"  This kit contains:
  • 11 yards of 4 oz. E glass cloth 30 inches wide.
  • Epoxy kits have 1.5 gallons of resin and 3 quarts of hardener and Additive F
  • Polyester kit has 1.25 gallons of resin and the right amount of catalyst plus
    surfacing agent.
Need mixing cups, tape, sandpaper, brushes, etc.?  Order the optional Supplies Kit
SUPs and Boards up to 12'  This kit contains:
  • 12.5 yards of 4 oz. E glass cloth 50 inches wide.
  • Epoxy kits have 1.5 gallons of resin and 3 quarts of hardener
  • Polyester kit has 2 gallons of resin and the right amount of catalyst plus
    surfacing agent.
Need mixing cups, tape, sandpaper, brushes, etc.?  Order the optional Supplies Kit
Boards up to 7'6"  This kit contains:
  • 8 yards of 4 oz. E glass cloth 30 inches wide.
  • Epoxy kits have 2 quarts of resin and 1 quart of hardener and Additive F
  • Polyester kit has 1 gallon of resin and the right amount of catalyst plus
    surfacing agent.
Need mixing cups, tape, sandpaper, brushes, etc.?  Order the optional Supplies Kit
Choose Polyester, Resin Research epoxy,
or Entropy Epoxy Bio Resin.
(polyester not shown).  E glass cloth
especially designed for surfboards.
Glassing Supplies Kit
We know that many builders already have some of these items so we separated them from the glassing
kits. Now you can buy just what you need.

This kit contains mixing cups, buckets, tack rags, and a whole box of nitrile gloves.  It also contains 10
brushes, stirring sticks, masking tape, pinline tape, and razor blades.  Its the perfect complement to any
of the glassing kits described above.

Add this kit to your glassing kit and you'll have everything you need to glass your board except solvent.
$69.99
Free US shipping.  Email  for
International shipping quote.
Resin Type
Starting at:
$199.99
Resin Type
$127.99
Starting at:
The glass in this kit is not wide enough for a Stu's SUP.  Please order a SUP kit below.
Resin Type
$91.99
Starting at:
These kits contain the correct amount of resin needed to laminate and gloss.  
The glass fabric is the correct width and length to put two layers on the deck and
one on the bottom which is industry standard.

Additive F is included with the epoxy kits.  It is added to the sanding coat and gloss
coats to enhance the flow and minimize fish eyes

Surfacing agent is included with the polyester kits. This is added to the sanding and
finish coats to make the resin cure rock-hard. Without it the resin will remain tacky.
Important information about glassing kits sent by air.
Our standard epoxy glassing kits contain resin which is classified hazardous and
cannot be sent by air freight. On epoxy orders outside the lower 48 states we will
substitute System 3 resin epoxy.  System 3 resin is comparable to Resin Research
resin in clarity and strength but does not have the same UV inhibiting
characteristics so a UV stabilized clear coat should be applied over the System 3
resin. Sorry, we can't ship polyester resin internationally but we can help you find a
local dealer.

Kits shipped outside the lower 48 States will include higher shipping costs.  Call
for a quote.
Surfboard Kits and Building Supplies
Resin Type
$213.99
Starting at:
SUPs and Boards up to 15'  This kit contains:
  • 15.5 yards of 4 oz. E glass cloth 50 inches wide.
  • Epoxy kits have 1.5 gallons of resin and 3 quarts of hardener
  • Polyester kit has 2 gallons of resin and the right amount of catalyst plus
    surfacing agent.
Need mixing cups, tape, sandpaper, brushes, etc.?  Order the optional Supplies Kit